What's New

list thumb list 2 columns gallery
  • 1989.47.91
    Image       - nail punch; wooden handle; long, metal bar with square piece which goes to point at bottom; copper head; used to put nail holes in horseshoes
    Image     - nail punch; wooden handle; long, metal bar with square piece which goes to point at bottom; copper head; used to put nail holes in horseshoes
  • 1989.47.90
    Image       - hook for door latch; hook is bent on one end; other end will be connected to bar of door latch
    Image     - hook for door latch; hook is bent on one end; other end will be connected to bar of door latch
  • 1989.47.89
    Image       - door latch assembly; hook (8.5 cm long), bar, screw (6.2 cm) and bolt; metal
    Image     - door latch assembly; hook (8.5 cm long), bar, screw (6.2 cm) and bolt; metal
  • 1989.47.86
    Image       - "C" clamp; steel; used to clamp wood and metal; shoe is attached to end of the screw thread by a ball joint which enables it to adapt to angled work; pressure is applied either by thumb screw (9.3 cm) or a tommy bar
    Image     - "C" clamp; steel; used to clamp wood and metal; shoe is attached to end of the screw thread by a ball joint which enables it to adapt to angled ...
  • 1989.47.85
    Image       - "C" clamp; steel; letter "G" engraved on it; used to clamp wood and metal; shoe is attached t the end of the screw (11.3) thread by a ball joint which enables it to adapt to angled work; pressure is applied eiter by thumb screw or a tommy bar
    Image     - "C" clamp; steel; letter "G" engraved on it; used to clamp wood and metal; shoe is attached t the end of the screw (11.3) thread by a ball joint ...
  • 1989.47.84
    Image       - "C" clamp; steel; black; used to clamp metal and wood; shoe is attached to the end of the screw (11.2 cm) thread by a ball joint which enables it to adapt to angled work; pressure is applied either by thumb screw or a tommy bar
    Image     - "C" clamp; steel; black; used to clamp metal and wood; shoe is attached to the end of the screw (11.2 cm) thread by a ball joint which enables it ...
  • 1989.47.83
    Image       - "C" clamp; steel; black; used to clamp wood and metal; shoe is attached to the end of the screw (11 cm) thread by a ball and joint which enables it to adapt to angled work; pressure applied either by thumb screw or tommy bar
    Image     - "C" clamp; steel; black; used to clamp wood and metal; shoe is attached to the end of the screw (11 cm) thread by a ball and joint which enables ...
  • 1989.47.82
    Image       - "Bradley's Streamline Friction Clamp", Pat. Applied For; metal; clamp is longer through top; shorter on side and bottom; metal screw (7.8 cm long) through hole at bottom
    Image     - "Bradley's Streamline Friction Clamp", Pat. Applied For; metal; clamp is longer through top; shorter on side and bottom; metal screw (7.8 cm long) through hole at bottom
  • 1989.47.81
    Image       - "Bradley's Streamline Friction Clamp"; Pat. Applied For; metal; clamp is longer through top, shorter on side and bottom; metal screw (7.8 cm long) through hole at bottom
    Image     - "Bradley's Streamline Friction Clamp"; Pat. Applied For; metal; clamp is longer through top, shorter on side and bottom; metal screw (7.8 cm long) through hole at bottom
  • 1989.47.80
    Image       - rope pulley or block and tackle; steel; black; hook on one end
    Image     - rope pulley or block and tackle; steel; black; hook on one end
  • 1989.47.79
    Image       - rope pulley or block and tackle; steel; painted black
    Image     - rope pulley or block and tackle; steel; painted black
  • 1989.47.78
    Image       - small rope pulley or block and tackle; steel
    Image     - small rope pulley or block and tackle; steel
  • 1989.47.77
    Image       - small rope pulley or block and tackle; steel; crew on one end of pulley
    Image     - small rope pulley or block and tackle; steel; crew on one end of pulley
  • 1989.47.76
    Image       - center bit; one side bent down; cut downward only, did not pull wood shavings upwards; steel
    Image     - center bit; one side bent down; cut downward only, did not pull wood shavings upwards; steel
  • 1989.47.75
    Image       - center bit; steel; cut downward only and did not pull shavings upwards; made in Germany
    Image     - center bit; steel; cut downward only and did not pull shavings upwards; made in Germany
  • 1989.47.74
    Image       - drill bit; round; cut in on one side; steel
    Image     - drill bit; round; cut in on one side; steel
  • 1989.47.73
    Image       - drill bit; steel; cylindrical; cut in on two sides
    Image     - drill bit; steel; cylindrical; cut in on two sides
  • 1989.47.72
    Image       - drill bit; steel; cylindrical; cut in on one side; made in Germany
    Image     - drill bit; steel; cylindrical; cut in on one side; made in Germany
  • 1989.47.71
    Image       - turn screw or screwdriver bit; flat screwdriver blade and flat tang which fits into the chuck of a brace; steel
    Image     - turn screw or screwdriver bit; flat screwdriver blade and flat tang which fits into the chuck of a brace; steel
  • 1989.47.70
    Image       - starting punch; copper; hollow through the centre; comes to a point
    Image     - starting punch; copper; hollow through the centre; comes to a point
Powered by / Alimenté par VITA Toolkit