Results

    - short, thick metal bit; blunt, large bottom; four corrugated sides - Date unknown - 3.5 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - metal; flat on one side, rounded on the other until 1/4 from the bottom; tapering rectangular shape forming a flat tip - Date unknown - 5.25 inches L Chatham Kent Museum Out in the Open exhibition

    - long narrow metal drill bit; wide, shallow wedges form a shape edge on the bottom - Date unknown - 5.75 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - short metal bit with a wide shaft; actual drill tip has only one wedge, two edges from a point - Date unknown - 4 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - short, wide metal drill piece; two wide flat edges form a narrow flat bottom - Date unknown - 4.5 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - short metal drill bit; inconsistent thickness; tip has a star-like formation with a small tip - Date unknown 4.5 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - short thick metal drill bit; flat bottom with a small hole in the end; four flat edges are corrugated with gradually decreasing wedges - Date unknown - 3 inches L Chatham Kent Museum Out in the Ope

    - short metal drill piece; long shallow wedges come to a dull rounded point - Date unknown - 3.5 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - short think metal drill bit; wide sharp, shallow wedges come to a small edged point - Date unknown - 2.75 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - metal drill bit; long deep wedges from a sharp edge at the tip - Date unknown - 4.5 inches L Chatham Kent Museum Out in the Open exhibition VS 248

    - circular saw blade; black metal; lopsided square at centre with rounded corners; one small hole about 1/2 inch from one side - Date unknown Chatham Kent Museum Out in the Open exhibition VS 246

    - rectangular cardboard case covered with textured imitation leather; front and back are riveted to sides; two leather straps are riveted to back and pass over top and buckle in front - interior is g

    - faux pearl and rhinestone buckle; rectangular with three peach coloured faux pearls at each end; through the back is a piece of mauve lace (same as dress 1991.21.11.1) with one end looped and secur

    - brown synthetic evening bag; gold tone clasp looks like sea shells; two brown handles - brown fabric lining with pocket; mirror, bobby pins and hair net inside pocket - printed inside "Girwood Bay,

    - beaded purse with small glass beads in First Nations design; beads are yellow, orange, green, black, red, blue, and clear - sewn onto beige material with beige nylon fabric lining - top edge has la

    - glass hood ornament from taxi; black with silver writing; set in plexiglass and held in a metal ring - "Austin" - Begin date 1962 / End date 1965 - 3.5 inches D - Recovered from Austin taxi cab c 1

    - metal licence plate; dark green with raised white lettering - "ONT 1974 / BT471" - Date 1974 - 7 inched L Chatham Kent Museum Out in the Open exhibition VS 306

    - metal wire stays; tightly woven in circular manner; metal tips at each end that resemble safety catch on a safety pin - Date unknown - 7.5 inches L Chatham Kent Museum Out in the Open exhibition VS

    - metal stay; loosely woven wire; metal tips at both ends - Date unknown - 8 inches L Chatham Kent Museum Out in the Open exhibition VS 179

    - blue silk ribbon with back printing that reads: "We Advance", "West Riding Agriculture Society", "Judges", "Fall Exhibition", Speed the Plough" - at bottom is a picture of plough, sickle and bale o